A truck bed liner can be installed at home if the bed is structurally sound, thoroughly prepared, and the liner product matches the installation method. The basic process is to remove hardware, clean and scuff the surface, repair rust or damage, apply the liner in controlled coats, and allow it to cure before loading the…
Most pickup truck beds are about 50 to 71 inches wide on the outside, but the usable width between the wheel wells is usually closer to 42 to 51 inches. A full-size truck commonly offers roughly 50 to 52 inches between the wheel housings, while compact and midsize trucks may provide about 42 to 48…
Measure a truck bed by taking the inside length from the front wall to the closed tailgate, the inside width between the sidewalls, and the depth from the bed floor to the top edge. Record each measurement in inches, then compare those numbers with the manufacturer’s published bed dimensions or the exact fit requirements for…
Sometimes. Whether it is illegal to ride in a truck bed depends mainly on the state, the road, the rider’s age, and whether a specific exception applies. Even where no law flatly bans the practice, riding in an open truck bed can still create serious safety and liability problems. The trade-off is similar to deciding…
A truck bed is usually about 5.5 to 8.5 feet long, 5 to 7 feet wide at the outside, and roughly 19 to 22 inches deep, depending on the truck and configuration. Compact trucks have smaller beds, while full-size pickups commonly offer short, standard, and long-bed options. The small detail that changes the answer is…
You can secure a CO2 tank in a truck bed by keeping it upright, placing it in a purpose-built cylinder holder or cradle, and restraining it with rated straps so it cannot roll, slide, or strike the bed. Do not tie the strap around the valve, regulator, hose, or protective cap, and do not transport…
A VIN can identify a truck’s year, make, model, cab configuration, engine, and sometimes its original bed-related configuration, but it does not always state the exact bed length in a simple, universal format. The most reliable approach is to use the VIN to identify the truck precisely, then confirm the bed size through the manufacturer’s…
A complete pickup truck bed commonly weighs about 300 to 700 pounds, although some compact beds fall below that range and heavy-duty or heavily equipped beds can exceed it. The exact figure depends on the bed’s length, steel or aluminum construction, tailgate, factory liner, equipment, and whether “bed” means only the box or the complete…
A short-bed pickup truck usually has a cargo box about 5 to 6 feet long, measured from the inside of the front wall to the inside of the closed tailgate. The exact length varies by truck, cab style, model year, and whether the manufacturer calls it a short, standard, or standard short bed. An unexpected…
Sometimes, but not everywhere. Whether you can ride in the bed of a truck depends on the state and local law, the type of road, your age, the truck’s equipment, and whether the trip can be made safely. A pickup bed is designed to carry cargo, not people. It lacks the passenger-protection system found in…